Functional characteristics
1. Compatible with standard Onvif protocol, SIP protocol, GB28181 protocol, can access VOIP phone system (compatible with mainstream IP-PBX)
2.★ Support associated major monitoring brand camera function, when the shout/intercom can be displayed through the IP network visual console bound camera video screen, truly visual broadcast.
3. Built-in 1 network hardware audio decoding module, support TCP/IP, UDP, IGMP (multicast protocol), to achieve network transmission of 16-bit CD audio signals.
4. Built-in 1080P HD, ultra-wide Angle camera, diagonal field of view Angle =160°, full range coverage, no dead Angle, using H.264 coding, high-definition monitoring, visual intercom.
5. Terminal camera self-bandwidth dynamic, with strong light suppression, weak light compensation function, weak light backlight environment can work normally.
6. Built-in high sensitivity microphone, wide sound acquisition area, high timbre restoration.
7. Built-in 60W/8Ω single-channel digital power amplifier, small heat, higher efficiency; The sound quality is very fine, the power is strong; Has network volume Settings.
8.1 AUX input interface, with independent volume adjustment potentiometer control, support off network local paging function. At the same time, it supports the function of silence intensity presetting reduction and background accompaniment presetting.
9. Compatible with any network structure such as router, switch, bridge gateway, Modem, Internet, 2G, 3G, 4G, 5G, multicast, unicast, etc.
10. Can customize 4G full Netcom Internet access function to meet 4G full Netcom wireless Internet broadcasting function.
Technical parameter
Network interface: Standard RJ45 input
Transmission rate: 100Mbps
Supported protocols: TCP/IP, UDP, IGMP (multicast), SIP, ONVIF, GB28181
Audio format: MP3
Audio mode: 16-bit CD quality
Sampling rate: 8K ~ 48KHz
Video transmission bit rate: 128Kbps-10Mbps
Camera: CMOS
AUX input sensitivity: 350mV (non-balance) industry standard wire terminal
Output power: 60W
Power consumption: ≤90W
Standby power consumption: < 3W
Frequency response: 317Hz~3.4KHz
Harmonic distortion: THD≤1%
SNR: > 65dB
Protection circuit: overload, short circuit protection circuit
Working temperature: -20℃ ~ 60℃
Working environment humidity: 20% ~ 80% relative humidity, no condensation
Power input: ~ 190-240V50-60Hz
Speaker unit: 4 "x4 2.5" x1
Protection level: IP66
Weight: 4.12Kg
Size: 613x152x100mm
Material: Aluminum alloy
Color: White
