Functional characteristics
1. The application of embedded computer and DSP audio processing technology, high-speed industrial single-chip microcomputer chip, startup time is less than 1s.
2.★ Support associated major monitoring brand camera function, when the shout/intercom can be displayed through the IP network visual console bound camera video screen, truly visual broadcast.
3. Built-in 1 network hardware audio decoding module, support TCP/IP, UDP, IGMP (multicast protocol), to achieve network transmission of 16-bit CD audio signals.
4. Through the setting, the analog audio can be collected to any terminal of the IP network visual intercom broadcasting system, and the network audio can be decoded to the power amplifier for music playback;
5.★ Built-in MP3/TUNER/ Bluetooth remote control function, with remote control distance of up to 8 meters.
6. Adopt the new 128*64 graphic dot matrix display. The display content is rich, clear and clear.
7. Integrated MP3 player module, with USB interface and SD card interface, super reading disk ability; Support MP3 and WMA double decoding playback format, MP3 can choose four playback modes: random, single cycle, folder cycle, all cycle; With 5 EQ sound effects to choose from, adapt to the listening habits of people at different levels; With built-in priority playback audio function.
8. Integrated TUNER module, with FM radio function, the number of stations can reach 15-40 or so, the radio is clear, convenient and practical.
9. Integrated Bluetooth module, can be connected to mobile phone/tablet/computer Bluetooth, Bluetooth effective distance up to 20 meters.
10.3 Route (AUX) and 5-way microphone (MIC) input interface, with independent volume and high and low bass adjustment potentiometer control, support off network local paging function.
11.★1 EMC input port, input emergency alarm voice signal is through.
12.2 audio signal auxiliary output interface, extensible external power amplifier, standard lotus socket interface, wiring connection is very convenient.
13. Microphone MIC1 has 48V phantom power supply for the microphone, energy saving and environmental protection.
14. 1 circuit short-circuit input, 1 circuit short-circuit output, support flexible custom functions, can achieve short-circuit collection, alarm trigger, and achieve fire, monitoring and other third-party equipment and platform linkage application.
15.★ Built-in priority function: network music, MIC1 microphone, EMC alarm, three signals can be freely set any signal priority through the dip switch, easy to use;
16. Support mute intensity preset reduction function, support background accompaniment preset function; Support status indicator display, including level indicator, standby indicator, etc.
17. Compatible with any network structure such as router, switch, bridge gateway, Modem, Internet, 2G, 3G, 4G, 5G, multicast, unicast, etc.
Technical parameter
Network interface: Standard RJ45 input
Transmission rate: 100Mbps
Supported protocols: TCP/IP, UDP, IGMP (Multicast)
Audio format: MP3
Audio mode: 16-bit CD quality
Sampling rate: 8K ~ 48K
Bit rate: 8K to 512Kbps
MIC input sensitivity: 5mV (non-balance)
AUX input sensitivity: 350mV (non-balance)
EMC input sensitivity: 775mV (non-balance)
AUX output amplitude: 1000mV 2-way lotus seat output interface
AUX output impedance: 470Ω
Treble increase, attenuation: ±10dB
Bass boost, attenuation: ±10dB
Power consumption: 10W
Frequency response: 20Hz ~ 20KHz (+1/-3dB)
Harmonic distortion: THD≤1%
SNR: ≥65dB
Working temperature: 5℃ ~ 40℃
Working environment humidity: 20% ~ 80% relative humidity, no condensation
Input power: ~ 190-240V/50-60Hz
Weight: 2.50Kg
Size: 484x205x45mm
Material: Black aluminum panel, SPCC cold rolled plate case
