Functional characteristics
1. The application of embedded computer and DSP audio processing technology, high-speed industrial single-chip microcomputer chip, startup time is less than 1s.
2. Built-in 1 network hardware audio decoding module, support TCP/IP, UDP, IGMP (multicast protocol), to achieve network transmission of 16-bit CD audio signals.
3. You can set the partition management policy in the background. You can open or close any partition through the software.
4. Support manual control partition opening or closing; It can also be connected with timers and intelligent controllers to realize automatic control.
5. 1 or 4 input power amplifier, 16 power output, each maximum controllable power 500W, total controllable power 8000W.
6. There is one 24V fire signal input interface; 1 fire short-circuit alarm trigger signal output.
7. Status display light, accurately indicate the music status;
8. Memory function, power failure does not lose memory, mains recovery automatic strobe.
9. Compatible with any network structure such as router, switch, bridge gateway, Modem, Internet, 2G, 3G, 4G, 5G, multicast, unicast, etc.
Technical parameter
Network interface: Standard RJ45 input
Transmission rate: 100Mbps
Supported protocols: TCP/IP, UDP, IGMP (Multicast)
Power partition output: 16 channels
Power consumption: 40W
Standby power consumption: < 3W
Working temperature: 5℃ ~ 40℃
Working environment humidity: 20% ~ 80% relative humidity, no condensation
Input power: ~ 190-240V 50-60Hz
Weight: 3.20Kg
Size: 484x205x45mm
Material: Black aluminum panel, SPCC cold rolled plate case
