1.8 independent analog audio balance input, 8 independent analog audio balance output, the maximum input and output 17dBu (5.48Vrms) without distortion, support for all kinds of microphone signal input and music signal input, each input setting can be manually adjusted by software or panel LCD display menu
2. Input each channel with microphone amplifier, 0~40dB gain adjustable, step by 1dB, can match different sensitivity of all kinds of microphones;
3. With AEC adaptive acoustic echo cancellation function, 6-level tail length effect adjustment, suitable for various occasions of interactive recording and broadcasting telecasting, teaching applications, restore clearer voice communication
4. With ANC adaptive active noise cancellation function and 4-level intensity adjustment, it can meet the local recording and broadcasting needs of different scenes, improve the signal-to-noise ratio of recording and amplification, and record clearer voice signals;
5. Built-in white noise, pink noise, sine wave three different test signal sound source, can be used as a variety of system detection sound source;
6. Each input has 48V phantom power switch, which can drive various capacitor microphone units
7. Each input with AFC active feedback suppression function, two adjustment
8. With AUTOMIX shared gain type automatic mixer, each channel is independently adjusted, there are 10 priority gears, adjustable slope and response time, to achieve automatic switching between microphones, microphones and music signals, music signals, after opening can also reduce noise, improve signal-to-noise ratio, reduce screaming phenomenon;
9. Built-in powerful matrix mixing function, fully open architecture, free setting, each mixing can also adjust the mixing amount independently, more convenient to match gain, intuitive view and debug signal routing;
10. Input 15 PEQ, output 10 PEQ adjustable, with high and low stand and all-pass filter, input and output with 48 order high and low pass frequency divider, debugging parameters can be saved and copied to other channels, convenient for all-round adjustment of the sound system
11. Each channel inputs a 2000ms delay controller and outputs a 2000ms delay controller
12. With AGC (automatic gain), noise gate, parametric equalizer, delay
13. Device, compressor, limiter and other functions
14.FIR filter, realize debugging EQ and frequency division does not affect the phase, but also can realize the phase correction function, the FIR DESIGNER embedded in Mconsole perfectly realizes the direct import of smart live parameters, without the need to pass third-party software, import to the processor to achieve all-round sound phase optimization of the speaker system. Obtain more accurate and clear sound restoration effect; The output is configured with 512-order FIR filters and provides 11 different window function filter applications with different characteristics.
15.60 preset memory locations
16. With video tracking control function, RS232/485 interface, support camera control PELCO-D/PELCO-P/VISCA and other protocols
17. Standard USB (TYPE-B) port, one three functions: support no-drive automatic connection software debugging; Built-in U disk function, store software and instructions; Stereo USB sound card function, support playback and recording.
18. With RS232 interface, RS485 interface, network interface, computer software control and central control function, through the network connection can manage multiple devices at the same time
19. Support mobile APP TCON software network control
20. Support 4-inch touch screen line control
21. Support archive locking, avoid misoperation or human disturbance of processor parameters, maintain system stability; The archive supports startup Settings, which can automatically save all parameters for instant debugging, and can also set unique startup status parameters to meet different system maintenance requirements.
22. Eight external GPIO ports
23. Dual LCD color LCD screen, support display device name, device preset, device IP, real-time level, channel mute status, input volume, output volume, input mode, device version view and other functions
24.Mconsole unified management, through USB/RS232/RS485/TCPIP multiple interfaces to connect to the control device, TCPIP control port can also achieve LAN remote, multi-device control, multi-device synchronization parameters, joint parameters and other powerful functions
25. Support central control command, software comes with central control protocol, can achieve central control function through RS232/RS485/TCPIP
