Functional characteristics
1. Four-channel stereo professional power amplifier;
2. There are three output modes of dual channel, mono channel and parallel connection for choice, and the output mode switch can be selected;
3. The volume of each channel can be adjusted separately;
4. The minimum load impedance of stereo work is 4Ω, and the normal load impedance is 8Ω; Strong dynamic power, can achieve low impedance drive
5. XLR, flexible and easy to use;
6. Built-in temperature compensation technology, still maintain a stable working state at high temperature.
7. Intelligent protection mode, with short-circuit protection, DC protection, power on/off protection and alarm functions;
8. Built-in advanced whole analog limiting protection, even in the case of overload distortion will not cause damage to your speaker system.
9. Low noise design;
10. The power supply adopts advanced anti-shock protection design, no matter how large the power is, it will not produce impact sound on the AC grid voltage and sound.
11. Class H high efficiency design, good dynamic large low frequency strength
Technical parameter
Output power stereo: 8Ω4X800W, 4Ω4X1200W, bridge power 8Ω2X2500W
Frequency response: 20Hz ~ 20KHz,
Sensitivity: 0.775V,
Total harmonic distortion: < 0.05%,
Conversion rate: ≥25V/μs,
Input impedance: 10KΩ (unbalanced), 20kΩ (balanced),
SNR: ≥95dB,
Damping coefficient: ≥250,
Dynamic range: ≥95dB,
Power supply voltage: 230V ~ +-10%/50Hz,
Machine weight: 22KG: Gross weight 23.5KG
Machine size: 455MM*485MM*90MM:
Outer box size: 530MM*525MM*145MM
