Functional characteristics
1. Dual channel stereo professional power amplifier;
2. There are three output modes of dual channel, mono channel and parallel connection for choice, and the output mode switch can be selected;
3. The volume of each channel can be adjusted separately;
4. The minimum load impedance of stereo work is 4Ω, and the normal load impedance is 8Ω; Strong dynamic power, can achieve low impedance drive
5. XLR, flexible and easy to use;
6. Built-in temperature compensation technology, still maintain a stable working state at high temperature.
7. Intelligent protection mode, with short-circuit protection, DC protection, power on/off protection and alarm functions;
8. Built-in advanced whole analog limiting protection, even in the case of overload distortion will not cause damage to your speaker system.
9. Low noise design;
10. The power supply adopts advanced anti-shock protection design, no matter how large the power is, it will not produce impact sound on the AC grid voltage and sound.
11. Class AB high efficiency design, good dynamic large low frequency strength
12. Output power stereo: 8Ω2X1000W, 4Ω2X1500W,
13. Frequency response: 20Hz ~ 20KHz,
14. Sensitivity: 0.775V/1.0V/1.4V,
15. Input impedance: 20KΩ,
16. Signal to noise ratio: > 95dB,
17. Output category :Class H,
18. Conversion rate :80V/μs,
19. Spectral wave distortion :≤0.05%(¼W/8Ω),
20. Intermodulation distortion :≤0.01%,
21. Output port: banana plug, Swiss socket,
22. Damping coefficient :≥250,
23. Separation degree :80dB,
24. Use current level: AC 180V ~ 260V(50Hz),
25. Machine net weight: 15.5KG gross weight 17.6KG;
26. Machine size: 313MM*484MM*88MM
27. Outer box size: 570MM*460MM*145MM
